#Settings for the Gyroscope block. [gyroscope] #Restoring-torque gain (Kp) at reference RPM, in Nm. Peak torque is roughly Kp·sin(tilt). Effective Kp scales linearly with current RPM up to referenceRpm. # Default: 16000.0 # Range: 0.0 ~ 1.0E9 strength = 16000.0 #Angular-velocity damping (Kd) at reference RPM, in Nm·s/rad. Effective Kd scales linearly with current RPM up to referenceRpm. # Default: 4000.0 # Range: 0.0 ~ 1.0E9 damping = 4000.0 #Integral gain (Ki) at reference RPM, in Nm/rad·s. Closes steady-state tilt error a PD controller can't eliminate against constant disturbances (off-center mass, other mods' torques). Rough starting point: Kp / 2.5. # Default: 6400.0 # Range: 0.0 ~ 1.0E9 integral = 6400.0 #Cap on the integral accumulator magnitude (rad·s), to prevent wind-up during sustained forced tilts (e.g. a player-held or stuck contraption). Smaller = faster recovery once the disturbance is released, but less authority against persistent torques. # Default: 0.5 # Range: 0.0 ~ 100.0 integralLimit = 0.5 #RPM at which the gyroscope reaches 100% effectiveness. Above this, output is capped. # Default: 256.0 # Range: 1.0 ~ 4096.0 referenceRpm = 256.0 #Base stress impact in SU per RPM. Total SU draw is roughly impact · |RPM|. # Default: 16.0 # Range: 0.0 ~ 1024.0 stressImpact = 16.0 #Settings for the Joystick block. [joystick] #Raw mouse pixels per tilt step. Lower = more sensitive. Full deflection (15 steps = 45°) is reached after 15 × this many pixels of mouse movement. # Default: 30.0 # Range: 1.0 ~ 500.0 pixelsPerStep = 30.0